Pounding Sex Machine with Thrust!
The ShockSpot Fucking Machine utilises a linear drive mechanism that produces the same thrust force for all stroke lengths. It is important to note that the ShockSpot force is expressed as thrust force, which is the actual thrust/push force that the ShockSpot F Machine can produce. This should not be confused with torque that is specified by other machines. Torque is frequently expressed in inch-pounds (in-lbs) or ounce-inches (oz-in), which is how much force the motor can produce at a distance of 1 inch from the centre of the motor shaft. For example, a motor that produces 1 inch-pound of torque can produce 1 pound of force at a distance of one inch from the centre of the motor shaft.
So exactly how does the ShockSpot’s thrust force compare to rotary based machines??? A ShockSpot Sex Machine stroking at 12 inches and producing 17.5 pounds of ‘thrust’ is equivalent to a rotary based machine with a motor producing 105 inch-pounds of torque.
ShockSpot Controls
The ShockSpot is controllable through the ShockSpot Touch and Feel software. Wireless Bluetooth control is also available so the ShockSpot can be controlled with a Smartphone. The software is used to select the desired motion or program for the ShockSpot. The system is started, stopped and paused through the software, or palm button. The new ShockSport stand-alone remote control allows the ShockSpot to be controlled without a PC. All of the Stroke parameters are easily controlled with the handheld unit. (Remote Control Unit Not Included but available at extra cost).
The stroke Length (depth), speed and smoothness (acceleration) are configured with sliders on the Touch and Feel software or the stand-alone remote control. The PC software also allows you to select preconfigured programs and customise programs to maximise your pleasure.
The ShockSpot pleasure systems come with pre-configured motion programs that can be selected and customised if desired. The current programs are: ‘A Stranger in Town’, ‘Cyclic Waves’, ‘Indecision’, ‘Little Guy’, ‘Random Strokes’, ‘Slow, Long and Easy’ and ‘The Buildup’. You can save, recall, delete and customise your programs using the ShockSpot Touch and Feel Software.
ShockSpot Extras
We have a large selection of Extra’s and peripherals for all the ShockSpot Sex Machine, including Adapters, Wireless Remote Controls, Dildo’s and more. Check out our large range!
ShockSpot Assembly
On each end of the main support member there is a quick fastening clip and a screw. DO NOT REMOVE THE SCREW! (the legs are designed to slide onto the fastening clip). Locate the leg marked with the “A” label and locate the end of the leg marked “Open End”. The end of the leg marked “Open End” has an opening which will slide over the fastening clip on the main support member.
To mount the legs:
1) Hold the leg marked “A” in one hand with the rubber feet facing downward.
2) Locate the opening in the end of the leg marked “open End”.
3) Slide the end of the leg marked “Open End” onto the fastening clip on the end of the main support member marked “A”. If the leg does not slide onto the fastening clip, slightly loosen the screw holding the fastening clip to the end of the main support member.
4) Align the label “A” on the leg with the label “A” on the main support member. Ensure the hole on the leg marked “Tighten Here” is aligned with the screw (on the fastening clip) on the end of the main support member. Insert the t-handled wrench through the hole labeled “Tighten Here” and firmly tighten the leg to the main support member.
5) Repeat the above steps for the leg marked “B”.
How to Attach the Dildo to the Shockspot Machine
IMPORTANT! The Cylinder must not be side loaded. Force to the cylinder must be applied only in the direction of the stroke. Forces applied to the side of the cylinder will cause damage to the system. When changing attachments to the end of the cylinder, power must be removed and the cylinder slightly extended. The cylinder must be supported by hand when applying pressure to attach/detach the attachment to the end of the cylinder to eliminate side forces to the cylinder. The cylinder must be protected from excessive shock. Ensure the cylinder is free to move and does not impact any hard surface during operation. Warranty will not cover cylinders exposed to side loads or shock.
Your Shockspot machine should continue to remain powered off/disconnected from the PC through this and the following steps.
The ShockSpot Software Installation
IMPORTANT! Your Shockspot machine should continue to remain powered off/disconnected from the PC through the software and driver installation process.
1) Click the link below to download the software. Once downloaded follow the steps to install the software onto your device.
2) Download and install the software. Once downloaded follow the steps to install the driver onto your device.
